Automatic Incoming Groups

Entry doors and sash sliding doors. Folds is a very important component of the automatic door. To fold, having larger sizes and moving at high speed, there are special requirements for strength, weight, insulation and sealing the passage. Leaf sliding doors are made, usually made of aluminum profiles with the filling of glass 'triplex', or tempered glass and are used with automation companies faac, ditec, came, dorma, gu, kth, nabco, besam. Sash, made entirely of glass, look elegant, but in the Russian context are relevant only within the premises. At the entrance from the street put wings of "warm" aluminum. Profile for manufacture of sliding door wings has a number of features.

The fact that the sliding door, in contrast to the swing can not be absolutely dense adjacent to the doorway. To reduce the area of these cracks in aluminum profiles for entrances must be provided by special grooves for installation of sealing gaskets. Particular attention should be paid to the glass, which filled sash automatic doors. Russia has been issued regulations Acts of moe and the Moscow Government regulating the use of facade glazing. According to these documents, glass, used in exterior structures must be water resistant. – Laminated or covered with special film.

A typical scheme of organization of the entrance with automatic sliding doors in the Russian context – a tambour made, usually made of aluminum walls with translucent structures. Tambour wall – this prefabricated wall, foundation of which is a frame made of aluminum or steel profiles, which are mounted panels made of various materials or glass. Stationary partitions are mounted to the floor and ceiling, and have high strength characteristics and excellent heat and sound insulation. But, unlike conventional walls, these walls have, much more decorative features and seamlessly fit into any interior. Stationary partitions can be opaque (decorated with any material that gives the designer the maximum possible) translucent (glass) and even combined (this is when one part of an opaque partition, and another – a glass). Tambour doors are installed in pairs at a distance of 2 meters or more. This distance is dictated by the fact that if you put them closer, radar sensors are one of the doors will be respond to another door. If, however, reduce the radar detection zone, visitors will have to stop before the door, waiting until it opens.

| November 5th, 2013 | Posted in General |

Comments are closed.